Specifications
INPUT
| INPUT | CVS-1000, CVS-2000, CVS-3000 |
| Nominal voltage & frequency | 110/115/120VAC or 200/220/230/240VAC |
| Voltage Range | 60~138VAC or 115~300VAC |
| Frequency Range | 50Hz :46~54Hz; 60Hz : 56~64Hz |
| Phase | Single phase with Ground |
| Power Factor | ≥0.97 |
OUTPUT
| Voltage | 110/115/120 (1±2%) VAC or 208/220/230/240 (1±2%) VAC |
| Frequency | 50 / 60 Hz ( Adjustable); 50 Hz AC Mode: Follow AC, Battery Mode: 50 Hz ( 1 ± 0 . 2 %); 60 Hz AC Mode: Follow AC, Battery Mode: 60 Hz ( 1 ± 0 . 2 %); |
| Wave Form | Pure sine wave |
| Power Factor | 0.8 |
| Harmonic Distortion | ≤3% THD (Linear load); ≤7% THD (Non-Linear load) |
| Overload Capacity | 110%～150% maintain 30s then turn to bypass output; over 150% maintain 200ms |
| Current Crest Ratio | 3:1 |
| Connections | Terminal block |
EFFICIENCY
| Battery Mode | 83% |
| AC Mode | 85% |
Battery
| Type | Sealed free maintenance lead acid battery / Lithium battery |
| Nominal DC voltage | 36 / 48VDC, 96VDC, 96VDC |
| Charge Current (MAX) | 7.0A, 8.0A, 8.0A |
GENERAL
| Bypass | Automatic Transfer: On overload and UPS failure Before UPS Power-on: “YES” |
| Transfer Time | 0ms; less than 4ms from inverter to bypass and vice versa |
| Indicators | LED Display: UPS status, Battery capacity, loading, Fault code |
| Audible Alarm | Bypass,battery mode, Battery low, Overload, Fault |
| Communications | Intelligent RS232 serial port: Software support Windows family software, Linux, Sun network operating system, IBM Aix, Compaq True 64 SGI IRIX, Free BSD, HP- UX and MAC SNMP (Optional): Remote control UPS through SNMP management and Internet USB (Optional): Windows family software and Mac OS |
| Environmental | Operating Temperature: 0~40°C Operating Humidity: 0-95% (No condensation) |
| Net Weight (No battery) | 52kg, 100kg, 100kg |
| UPS Dimension L*W*H (mm) (Movement) L*W*H (mm) (Cabinet) | 482*380*88.4 638*507*775, 482*448*88.4 612*525*1511, 482*448*88.4 612*525*1511 |
